The delivery of sterile surgical instruments to the operating theatre not only depends on the quality of the sterilisation process, but also upon the efficacy of the packaging material used. The SafeSeal Sterilisation Wrap range includes single sheet and double bonded sheet. It enables you to tailor the complete packaging system to the instrument container, ensuring efficient sterilisation and anti-microbial protection throughout the life cycle of the instrument tray.SafeSeal Sterilisation Wrap is made of polypropylene using a ¬five-layer (Spunbond-Melt-blown-Melt-blown-Melt-blown Spunbond) process.The outer layers of the sterilisation wrap provide exceptional strength and durability.The inner layers of melt-bond ¬bers provide an optimum barrier to bacteria and liquid while allowing penetration of gas sterilantEvery SafeSeal Sterilisation Wrap I Delivers Penetrability During sterilisation of surgical instruments, the packing system must permit rapid entry and exit of the sterilisation medium into the interior of the pack to ensure that the contents are fully sterilised. The SafeSeal Sterlisation Wraps are compatible with Ethylene Oxide (45°C /180 min/650mg/I), Steam (134 °C/18 min), and H2 O2 Plasma (50°C/ 2 injections) allowing full penetration of EO, Steam and Plasma sterilisation agents.Barrier Effectiveness The sterile barrier system of the SafeSeal Sterilisation Wraps prevents the ingress of micro-organisms and unwanted foreign bodies to the pack interior, to maintain sterility of the contents via the ‘tortuous path’ principle. Strength SafeSeal Sterilisation Wraps’ spunbound outer layers are designed to provide optimum resistance to tears, punctures, strain abrasion, and fraying under normal conditions. It provides adequate repellency against water and other liquids, which can serve as vehicles for transmission of micro-organisms.